Custom Red Two-Piece Cosmetic Gift Box
Custom red two-piece cosmetic gift box with a removable lid and shaped inserts for makeup sets. Tailored layouts for beauty gifting and retail displays.
View productThis guide breaks down one confirmed build in detail, so the magnetic lip gloss set box described here can be specified without guesswork: a book-style rigid box made from extra-thick greyboard wrapped in premium art paper, closed by a hidden magnet and finished with a matte soft-touch film. If your brief calls for a matte lip gloss box that survives handling, shipping and repeat opening, the sections below cover the closure, the insert, the finish list, the size layouts and the ±0.2 mm tolerance that governs how everything fits together.
Four numbers and material facts decide most of the questions a packaging brief raises before a supplier conversation starts. These are the figures this build is quoted against.
Use this table as the reference column of your brief. Each row is the listed specification for the coral red matte set box, not a range of optional extras.
| Box type | Magnetic book-style rigid box with a magnetic flip mechanism |
|---|---|
| Material | Extra-thick rigid greyboard wrapped with premium art paper |
| Surface finishing | PMS custom color print + matte soft-touch film + single-color hot stamping / logo print |
| Insert options | Snug-fit EVA, or high-density sponge with velvet lining; flocked material and plastic blister also listed as shockproof insert structures |
| Tolerance | Under ±0.2 mm |
| Size layouts | Fully customizable per product dimensions; available for single, 3-piece or 5-piece layout |
| Inner structure | Shockproof inserts — EVA, high-density foam, flocked material or plastic blister — custom-made to fit the product bottles |
| Closure | Secure hidden magnetic closure; the magnetic flip opens and closes with consistent alignment |
| Corner geometry | Sharp right-angle cuts on the rigid box construction |
Colour is shown in a solid coral red with a minimalist blank cover; logo placement, colour match and stamping colour are part of the customization conversation.
The four working parts of this box are the board, the wrap, the magnet and the corner. Each one changes a different thing in the finished set, so they are worth specifying separately rather than as one line on a purchase order.
The insert is what actually holds the bottles, and it is the first thing a buyer notices when the lid opens. Four shockproof structures are listed for this box, each suited to a different weight of bottle and a different level of presentation.
Cut to the bottle outline so each unit sits in its own cavity. Best when the set has mixed component shapes and the tray has to hold them firmly.
A softer cavity wall with a velvet face. Best for premium presentation where the insert stays visible every time the box is opened.
A fibre-finished surface that reads as fabric. Best for gift-set and promotional builds where the tray is part of the visual design.
A formed tray that locks each bottle in place. Best for transit-heavy distribution and e-commerce bundles where movement must be eliminated.
Cavity design starts from the widest point of the bottle, cap included, plus the wall thickness the chosen insert material needs. Two gloss bottles with the same 5 ml fill can need different cavities if one has a wider cap or applicator collar, which is why the layout is set from measured components rather than from a nominal set size.
The base build carries a matte soft-touch film with anti-fingerprint behaviour. Everything below is from the listed finish set for this box, with the practical consequence of each choice written next to it.
| Finish | What it does | Best for | Watch out for |
|---|---|---|---|
| Matte soft-touch film | Anti-fingerprint, wear- and abrasion-resistant matte surface | The default look on a handled retail set | Soft-touch surfaces show scuffs on corners first |
| Matte lamination | Low-sheen film over the printed wrap | Large flat cover areas | Slightly less tactile than soft-touch film |
| Gloss lamination | High-shine film that lifts colour contrast | Vivid graphic covers | Shows fingerprints more readily than matte |
| Matte UV | Matte coating applied as a spot or full pass | Selective texture against a printed base | Registration accuracy decides the edge quality |
| Matte varnish | Water-based style matte coat without film | Lighter-weight, paper-forward looks | Lower physical protection than a film |
| Water-based varnish | Thin protective coat over the print | Keeping a natural paper feel | Limited scuff resistance on high-traffic edges |
| Reverse matte finish | Matte effect achieved from the reverse of the sheet | Deep, even low-sheen colour blocks | Suits solid areas better than fine detail |
| Hot stamping | Heat-pressed metallic or pigment foil | The logo on the cover | Fine hairlines need generous stroke widths |
| Silver stamping | Metallic silver foil impression | Cool-toned minimal branding | Tarnishing and contrast vary by foil stock |
| Color foil stamping | Foil in a chosen non-metallic colour | Tone-on-tone or brand-accurate accents | Colour match is nearest-available, not exact |
| Cold foil stamping | Foil applied through the print process | Wide metallic areas and patterns | Less relief than hot foil |
| Embossed foil stamping | Foil combined with a raised impression | A single hero logo with depth | Needs space around the mark to read cleanly |
| Embossing | Raised relief without foil | Tactile, unprinted brand marks | Shows best on a matte base |
| Debossing | Recessed impression pressed into the board | Restrained, low-contrast branding | Can soften on heavily textured wraps |
| Spot UV | Gloss detail laid over a matte field | Highlighting one element of the artwork | Contrast depends on the base finish |
| Cut-out window | Die-cut aperture in the lid or sleeve | Showing the gloss bottles before opening | Requires an insert that looks good from above |
| Brushed finish | Directional brushed texture effect | Metallic-look minimal covers | Directional texture can fight fine type |
| Flocking | Fibre surface applied to the sheet | Soft, fabric-like interior or exterior panels | Collects dust, so plan for a clean pack area |
| Laser effect | Fine laser-drawn pattern on the surface | Precision micro-detail and serial elements | Best kept to small areas of the layout |
Finish names above follow the listed option set for this box. Combining more than two finishes on one cover is usually a question of artwork space and tooling rather than of availability, so confirm the combination in the quote stage.
Measure three things before the layout is drawn: the bottle diameter at its widest point including the cap, the overall height with the applicator fitted, and the clearance you want between neighbouring bottles. The box is then sized from those numbers, not from a standard set size.
The stated ±0.2 mm tolerance is where the build either feels precise or feels loose. It governs the cavity-to-bottle fit, the seating of the insert inside the tray, and the way the magnet pair meets when the lid closes. Move outside that band and the symptoms are predictable: bottles that rotate in their cavities, an insert that lifts at one corner, or a lid that needs a nudge to sit flat.
Start from the way the set will be used, then read across to the part of the build that carries that job. Each pairing below uses a listed option for this box.
Bring four things to the quote: the measured bottle dimensions including the cap, the cavity count you want, the insert material and the finish combination. From there the build is quoted against PMS custom color printing, matte soft-touch film, hot stamping or logo print, and the single, 3-piece or 5-piece layout you select.
Keep adjacent product options together for a faster catalog comparison.
Custom red two-piece cosmetic gift box with a removable lid and shaped inserts for makeup sets. Tailored layouts for beauty gifting and retail displays.
View product
Custom hinged gift box for perfume, sunglasses and sunscreen, featuring white EVA inserts, fitted cavities and ribbon-supported presentation.
View product
Custom half-moon makeup gift box with a botanical sleeve, ribbon pull and fitted EVA insert for beauty collections, retail displays and gifting.
View productreview the product details, images, and specifications presented on the official product page.
use the application and use-case information published on the official product page.
confirm the specifications and options listed for the exact product variant before placing an order.
check the official product page or ask the supplier about options shown for the selected product.
use the official contact or inquiry path provided on the site.
include the product page, intended use, required quantity, and any specifications you need the supplier to review.
